1.Component connection: Ultrasonic Scalpel is mainly composed of a host, tool head, tool handle, Ultrasonic Scalpel conversion line and foot switch.
These components need to be connected properly and to ensure that the Ultrasonic Scalpel is working properly.
2.Power connection: Connect the power cord, a separate plugboard is recommended,
and ensure that the distance from the electrotome instrument is at least 1 meter, to avoid interference.
3.Foot switch connection: Connect the Ultrasonic Scalpel foot to the host,
it is recommended not to remove the foot frequently, to reduce interface damage.
4.Connection of tool head and shank: correctly connect the sterilized tool handle with the tool head,
use a torque wrench to turn the black thread under the tool head clockwise, to ensure a firm connection.
5.Host test: power on the host, self-test. The display screen of the host will show that the Ultrasonic Scalpel is being detected and sound is emitted.
After is successful, the standby indicator is on. indicates that the Ultrasonic Scalpel can be used normally.
6.Precautions for use:
①When using, the tool head should avoid metal instruments, to prevent the tool head from disconnecting.
②If is not used for a long time, press standby to keep the host in the standby state. performs a secondary check when the host is used again.
③Do not clamp metal objects, bones, to avoid cutting head breakage.
④Use the first 2/3 of the tool head to clamp the tissue to shorten the cutting time.
7.Cleaning and sterilization: after use, should be cleaned immediately, especially the coagulation of blood clots will affect the cleaning effect.
The knife core should be cleaned with soft gauze gently scrub, avoid the use of hard brush, to extend the service life.
Through the above steps, can be used to carry out the operation correctly, at the same time pay attention to the safety and hygiene during the operation,
to ensure the success of the operation.
